Guys, how setup only 1 LH with Pimax ? I’m usually using 2 LHs but I want give/loan one of my LH to my friend for test. Right now I have chanel “b” and “c” active , changed to “a” and powered on one base station but Pimax is not tracking and base station is blinking in Pitool.
Kind of noob question probably but I never tested myself Pimax with 1 LH.
1 Like
Use channel B.
The station must be at least 1.5m, better 2m away.
2 Likes
Tryied. Pimax is not tracking. Meybe becouse he got used to 2 LHs system
No, I can easily switch from both to one.
However, I also have a distance of 3m.
Do you have alsu use channel c?
2 Likes
Agreed, I have a single v1 LH and works fine with B.
Small room, but initial tracking is fine once you get 2m away, and then you can move closer in again.
4 Likes
Its not problem with room , distance and so on… Pimax is tracking only when 2 of my LHs are turned on and communicating each other. Tried different chanels and distances already.
2 Likes
Try a pc reboot with only 1 Station… maybe
2 Likes
I have solved problem - thanks to all involved
5 Likes