One base station 2.0 with Pimax

vicentelip · November 16, 2019, 4:30pm

I received today one 2.0 base station and index controllers. I have had no problem pairing them in pitool and steam but my controllers are reversed. I need to set the base station behind me to have the controllers in the right place facing front. The trouble is the tracking is poor because the base station is behind and I shadow the controllers and sometimes the hmd with my body and chair.
How can I configure my base station to set it in front of me? Many thanks for your advice.

Pimel · November 16, 2019, 4:39pm

Interesting. Can’t help you though.

TOOOOHKA · November 16, 2019, 4:59pm

How about setting your BS upside down?

TrevorVR · November 16, 2019, 5:02pm

By reversed I assume you mean that the left controller appears to right hand and vice versa?

If thats the case, try powering the controllers up in different order.

vicentelip · November 16, 2019, 5:09pm

The answer is that there is a small hole at the back of the base station. Then you can set it properly. Now it works. I add a picture for others. It doesn’t come with the instructions. That’s weird and it is very difficult to find the solution through internet. Sweviver helped me.