Experimental Beta version 0.81.0.0

[Heliosurge]

@SweViver

Hey guys!

Meanwhile me and @arminelec are currently putting all our efforts into the back-end system for online/cloud profile feature, I would like to ask you all, if you could test this (temporary) Experimental Beta version 0.81.0.0 and report the functionality in this thread.

This experimental version is based on 0.80.0.0 and additionally adds the below listed things to Virtual Desktop, to be tested. Please let us know how this works, IF it works and if we should change or add anything more. Thank you

Changes:

• Config-menu added for manual order of monitors (available for multi-monitor setups with 2 or 3 monitors connected)

• Click on the config icon and a popup shows with available monitor-order buttons. Click on any of the buttons to instantly switch the order.

• 3 monitor setups have 6 monitor orders to switch between (basically all possible):
  [2] [1] [3] where 1 is center monitor
  [3] [1] [2] where 1 is center monitor
  [1] [2] [3] where 2 is center monitor
  [1] [3] [2] where 3 is center monitor
  [3] [2] [1] where 2 is center monitor
  [2] [3] [1] where 3 is center monitor

• 3 monitor setups have 4 orders to switch between (2 orders with 2 layouts each)
  [1] [2] where 1 is center monitor
  [2] [1] where 1 is center monitor
  [1] [2] where 2 is center monitor
  [2] [1] where 2 is center monitor

• Using any mode above, the monitors are synced by PE, so you can easily drag icons/windows between monitors with VR controller pointer that controls the Desktop mouse - even if the order is not the same as the real monitor order shown in Windows/Nvidia control panel

• Upon changing order, the setting is automatically saved in user profile for next PE launch.

• Upon using multi-monitor view, the setting is automatically saved for next PE launch.

• Upon launching PE and going to Virtual Desktop, lastly used monitor order is shown based on lastly saved order in profile

• Upon launching PE and going to Virtual Desktop, multi-monitor view is shown if lastly used

• For single-monitor systems, no changes have been made.

Install :

This is NOT an installer. Unzip the file and copy all the files inside of PVRHome folder into your PVRHome installation (normally C:\Program Files\Pimax\PVRHome). Now start Pimax VR Experience from PiTool again, by ticking the checkbox “Start Pimax VR Home” under Settings > General.

Download (Right click and Save-As):

PVRHome_0.81.0.0_Experimental_Beta.zip

We appreciate all feedback, thanks!

As per @SweViver request only post in the Above Quoted Topic.

Discuss Here